Power Supplies

Long Distance System Controller (LD-C) driver

Controlling LED-Streifen B strips is simplicity itself with the LD-C. Eighteen channels are split across six outputs, each of which can power up to 22x LED-Streifen B 25-250 or 11x LED-Streifen B 12-250 strips. Separate power supplies for each colour, combined with on board current regulation in the LED strips themselves, ensure consistent output over long runs.

Features:
Separate power supply for each colour
Quickpatch modes
Smooth blending of colour with Lehmann Modulation

Control data: DMX512A (galvanically isolated)
Input voltage: 100-240VAC, 47-63Hz
Power consumption: 700VA
Dimensions: 19 2U rack, W483mm x H88mm x D470mm
Weight: 9.7kg

Product information (PDF)

Cabling example (PDF)

System Power Supply 4 (SPS4) driver

The System Power Supply 4 (SPS4) is designed to drive all LED-Streifen and Kachel illuminants from Schnick-Schnack-Systems GmbH and offers a simple, flexible and intelligent solution to LED backlight control. 

Addresses are easily assigned to outputs via a user-friendly menu system and Quickpatch modes allow the rapid creation of combined or repeating groups, saving the need for complex cabling. Stand alone and manual modes offer DMX-free control options.

Features:
• Built in DMX routing and patching
• Quickpatch modes
• Stand alone mode
•Manual control mode

No. of output channels: 3 - 240 DMX channels, across four outputs
Control data: DMX512A (galvanically isolated)
Input voltage: 100-240VAC, 47-63Hz
Power consumption: 700VA
Dimensions: 19 2U rack, W483mm x H88mm x D425mm
Weight: 8.4kg

Product information (PDF)

Cabling example (PDF)

System Power Supply 4E driver

The System Power Supply 4E (SPS4E) has been especially designed as a state-of-the-art power and data supply unit , to drive Series C LED products by Schnick-Schnack-Systems, which have the facility for individual LED control.

A choice of control data, be it via the integrated Artnet interface or standard DMX512, means that the SPS4E can be run from a lighting console, media server or video converter. The Artnet interface is powerful enough to display flicker-free, animated images through all our multimedia-ready LED products.

From the smallest to the largest installation, the System Power Supply 4E offers a simple, flexible and intelligent solution to multimedia LED control.

Features:-
DMX or ArtNet control
Integrated Artnet interface
Can display animated graphic images using Series C products
Quickpatch modes
Software updates from SD card
Interface for future upgrades

No. of output channels: 3 - 2048 DMX channels
Control data: Artnet (DMX over Ethernet) / DMX512A (galvanically isolated)
Input voltage: 100-240VAC, 47-63Hz
Power consumption: 700VA
Dimensions: 19 2U rack, W483mm x H88mm x D425mm
Weight: 8.4kg

Product information (PDF)

Cabling example (PDF)

Connection Accessories

XLR-4 Adapterboard Mk.2

An inexpensive adaptor board, which acts as an interface between the 4-pin XLR cables used by the external components of the system, with the smaller Molex PCB system connectors, used on Series B & C products.

Intelligenz on-board, 3 channel DMX controller

The Intelligenz card allows groups of 1-6 LED-Streifen B 25-250 strips to be controlled by three channels of DMX data, independently of the rest of the system. The card senses which DMX channels are occupied by other Intelligenz products and automatically allocates the correct DMX channels to the strips under its control, removing the need for complex cabling, or addressing of LED lighting units.

LD-C system connector fanout

HAN B 24 connector, fanning out into six, four-pin Molex PCB system connectors. Designed to connect the Long Distance Controller to the LED-Streifen B strip.

Length: 4m
Voltage: 24 VDC
Current: 3A

XLR 4-pin cable

4-pin XLR cables, with two shielded lines for data. These carry power and DMX data from SPS4 and SPS4E power supplies to the XLR4 Adaptorboards.